液体密度测量实验改进的研究

利用电动音叉仪测量液体密度,分析原实验仪器存在的不足,对原实验装置做了改进。通过测量水的密度,结果显示改进后的实验仪器不但提高了测量的精确度,而且操作更快捷、方便。     

Suppression of super-harmonic resonance response using a linear vibration absorber

Super-harmonic resonances may appear in the forced response of a weakly nonlinear oscillator having cubic nonlinearity, when the forcing frequency is approximately equal to one-third of the linearized natural frequency. Under super-harmonic resonance conditions, the frequency-response curve of the amplitude of the free-oscillation terms may exhibit saddle-node bifurcations, jump and hysteresis phenomena. A linear vibration absorber is used to suppress the super-harmonic resonance response of a cubically nonlinear oscillator with external excitation. The absorber can be considered as a small mass-spring-damper oscillator and thus does not adversely affect the dynamic performance of the nonlinear primary oscillator. It is shown that such a vibration absorber is effective in suppressing the super-harmonic resonance response and eliminating saddle-node bifurcations and jump phenomena of the nonlinear oscillator. Numerical examples are given to illustrate the effectiveness of the absorber in attenuating the super-harmonic resonance response.     

Free vibration of non-uniform column using DQM

Most of engineering problems are governed by a set of partial differential equations with proper boundary conditions. The present work is concerned with free vibration analysis of non-uniform column resting on elastic foundation and subjected to follower force. The used method of solution is the differential quadrature method (DQM). Formulation of the problem is introduced. The results obtained and compared with the exact solution and traditional numerical techniques such as finite element method. The parametric study is used to investigate the effect of column geometry on the natural frequencies, the mode shapes and the critical load.     

Thickness-shear vibration of a quartz plate connected to piezoelectric plates and electric field sensing

We study thickness-shear vibration of a quartz plate connected to two piezoelectric ceramic plates with initial deformations caused by a biasing electric field. The theory for small deformations superposed on finite biasing deformations in an electroelastic body is used. It is shown that the resonant frequencies of the incremental thickness-shear vibration of the quartz plate vary with the biasing electric field. The biasing electric field induced frequency shift depends linearly on the field. Therefore this effect may be used for electric field sensing. The dependence of the electric field induced frequency shift on various material and geometric parameters is examined. When the electric field is of the order of 100 V/mm, the relative frequency shift is of the order of 10⁻⁵. The case when the piezoelectric plates are replaced by piezomagnetic plates is also investigated for magnetic field sensing, and similar results are obtained.     

液体中光击穿所激发声场的理论研究

以液体中光击穿所激发声场为研究对象,在等离子体椭球模型的基础上,为方便理论计算,简化等离子体椭球模型,提出了等离子体椭圆盘模型,对光击穿所激发声场进行了理论研究.得到了等离子体椭圆盘辐射声场的声压规律,并利用椭圆坐标变换,依据马修函数特性和模态的正交性,求得了等离子体椭圆盘振动位移的解析表达式.     

Temperature dependence of the properties of strong-coupling bipolaron in a quantum dot

Temperature dependence of the properties of strong-coupling bipolaron in a quantum dot (QD) is studied based on the Lee-Low-Pines-Huybrechts variational method and quantum statistical theory. Results of the numerical calculation show that the vibration frequency as well as the absolute value of the induced potential and the effective potential all increase with increasing coupling strength and temperature, respectively, and they also increase with decreasing relative distance of electrons. The bipolarons are closer and more stable when the temperature is higher and coupling strength is larger. The influence of radius of QD and dielectric constant ratio on the effective potential is little.     

Parametric excitation of waves on a free boundary of a horizontal fluid layer

We consider the dynamical stability of horizontal fluid layer, performing harmonic oscillations in vertical direction. The continued fractions approach allowed us to avoid the conventional restriction to the case of small viscosity and almost-resonant frequencies. Our numerical results cover a wide range of the parameters (viscosity, amplitude and frequency of the oscillation, and depth of the layer). To cite this article: V.I. Yudovich et al., C. R. Mecanique 332 (2004).     

数控裁剪机切割刀壳体振动噪声预测分析*

高频往复式切割刀是柔性材料数控裁剪机的核心部件。该文对切割刀壳体的振动噪声改进措施进行研究。首先对切割刀进行刚体动力学分析,获取其所受动载荷情况,并通过数值计算验证了切割刀刚体动力学模型的可靠性。其次,基于有限元法获取切割刀壳体模态特性,并通过锤击激振实验验证了有限元模型的准确性。然后基于模态仿真结果进行谐响应分析,将计算得到的频域动载荷施加至切割刀壳体各螺栓固定处,获取结构加速度响应频谱,结合振动响应结果,对壳体进行声固耦合分析,并进行实验对比,验证了分析方法的准确性。最后,计算不同的阻尼措施对壳体噪声辐射的影响,为切割刀的减振降噪提供参考。     

颗粒物质对风积沙压实特性影响研究

本文从颗粒物质的角度探讨了风积沙的压实特性和机理。研究表明,风积沙的重型击实试验曲线呈"双驼峰"形式,表明风积沙具有干压实的特性,水在风积沙的压实过程中扮演着不同的作用|室内振动试验表明振动加速度及振动时间影响着风积沙"巴西坚果效应"与"反巴西坚果效应"之间的转化,从而影响风积沙的振实密度,二者均存在一个产生最大振实干密度的最优值。现场试验通过控制机械参数(振幅A=0.4mm,频率f=48Hz)在压实5遍的时候,可使压实度达到96.8%,CBR值达到25.3,均能满足《公路路基设计规范》要求。